FeedsForLess.Com Direct
Geobond-55 Lb
Geobond-55 Lb
Couldn't load pickup availability
GEOBOND 25 KG BAG
GeoBond® is a natural Miocene Diatomaceous Clay consisting of Diatomite (45%)and montmorillonite (55%). After mining, it is further processed using an exclusive wood burning method to enhance its active properties. The resulting product is a grey odorless granular material which has a density of about 40 lbs per cubic foot.
25 KGAll-Natural and Safe
GeoBond® does not bind vitamins or minerals and contains safe levels of chemical elements. When assessed for its toxic equivalence factor using the World Health Organization scheme, GeoBond® tested negative for any dioxin and furan pollutants. GeoBond® is OMRI-listed (Organic Materials Review Institute) natural diatomaceous clay consisting of roughly 45% diatomite and 55% montmorillonite. Both substances are generally recognized as safe (GRAS) by the FDA under CFR 573.340 and 581.1 respectively.
Better than Bentonite
GeoBond® has been proven to be more effective solution than sodium bentonite; GeoBond® has a bipolar charge which allows it a broader spectrum approach when dealing with safe feed challenges. Since GeoBond® is non-swelling clay it does not bind vitamins and minerals. GeoBond® also is very cost effective when comparing it to bentonite.
GeoBond® Versus Bentonite
GeoBond® | Bentonite | |
---|---|---|
Absorbent | X | X |
Swelling | X | |
Binds Vitamins | X | |
Binds Minerals | X | |
Polar Charge | X | |
Bipolar Charge | X | |
Pelleting Aid | X | |
Multiple Binder | X | |
Single Binder | X |
Analysis
Trace mineral chemical analysis by the Virginia Division of Mineral Resources.
Product Description: Clay fines from discharge
Method of Mineralogy Analysis: Product sample mixed with water, spread on x-ray slide, dried at 80 degrees C for 16 hours, and elemental chemistry determined with x-ray fractometer.
Mineralogy Analysis: Quartz/Illite
Method of Chemistry Analysis: Product sample mixed with water, spread on x-ray slide, dried at 80 degrees C for 16 hours, and elemental chemistry determined with x-ray fractometer.
Chemistry Analysis
MEAN % | MEAN % | ||
---|---|---|---|
SiO2 | 75.29 | Na2O | 0.14 |
AI2O3 | 9.25 | K2O | 1.57 |
FeO3 | 2.90 | TiO2 | 0.55 |
MgO | 1.65 | P2O5 | 0.45 |
CaO | 1.86 | LoI | 6.33 |
GeoBond® Is Pure And Safe
Maximum Tolerable Level (ppm) |
Level in treated feed at 2% inclusion (ppm) |
|
---|---|---|
Cadmium | .5 | .06 |
Mercury | 2 | 0 |
Selenium | 2 | 0 |
Cobalt | 10 | .08 |
Molybdenum | 10 | .69 |
Vanadium | 10 | 1.53 |
Barium | 20 | 1.92 |
Tungsten | 20 | .03 |
Copper | 25 | .29 |
Lead | 30 | .26 |
Arsenic | 50 | .23 |
Nickel | 50 | .49 |
Iodine | 50 | .03 |
Antimony | 70 | .03 |
Boron | 150 | 1.04 |
Aluminum | 200 | * |
Bromine | 200 | 1.53 |
Zinc | 300 | 1.94 |
Bismuth | 400 | .01 |
Manganese | 400 | 1.24 |
Chromium | 1000 | 1.51 |
*Maximum tolerable level for aluminum refers to highly bioavailable soluble aluminum salts. The aluminum in GeoBond® is a natural and innocuous aluminum compound that is not highly bioavailable.
Better than Bentonite
GeoBond® has been proven to be more effective solution than sodium bentonite; GeoBond® has a bipolar charge which allows it a broader spectrum approach when dealing with safe feed challenges. Since GeoBond® is non-swelling clay it does not bind vitamins and minerals. GeoBond® also is very cost effective when comparing it to bentonite.
GeoBond® Versus Bentonite
GeoBond® | Bentonite | |
---|---|---|
Absorbent | X | X |
Swelling | X | |
Binds Vitamins | X | |
Binds Minerals | X | |
Polar Charge | X | |
Bipolar Charge | X | |
Pelleting Aid | X | |
Multiple Binder | X | |
Single Binder | X |
Analysis
Trace mineral chemical analysis by the Virginia Division of Mineral Resources.
Product Description: Clay fines from discharge
Method of Mineralogy Analysis: Product sample mixed with water, spread on x-ray slide, dried at 80 degrees C for 16 hours, and elemental chemistry determined with x-ray fractometer.
Mineralogy Analysis: Quartz/Illite
Method of Chemistry Analysis: Product sample mixed with water, spread on x-ray slide, dried at 80 degrees C for 16 hours, and elemental chemistry determined with x-ray fractometer.
Shipping & Returns
Shipping & Returns
